Weedol Path & Gravel Control 3 Litres

Contains 43.1 g/L, Pelargonic acid as an Emulsion, oil in water (EW).

Path & Gravel Control

Net Content: 3 Litres

Features: Ready to Use Kills Weeds Treats 100m² Protect from Frost

Storage: Keep product in original container, tightly closed, in a safe place.

Storage Type: Ambient

Product Information: No Glyphosate

No Glyphosate claim is provided to help distinguish from other formulas that may contain glyphosate.

Results in 3 hours

Visible results may be seen in 2-3 hours

Kills weeds and active ingredient breaks down in soil naturally

Ideal for use on gravel paths, permeable patios and driveways

Preparation and Usage: Instructions for Use

For use only as a home garden weedkiller. Read all safety instructions before use.

When to Use

April - November, when weeds are actively growing

• For best results apply in calm, dry, warm conditions, usually early spring or summer, when there is no risk of spray drift onto adjacent desirable plants.
• Most effective on young weeds less than 10 cm.
• This product will not provide long term control of perennial weeds
• Don't apply if risk of frost, as weeds will not be actively growing
• Reapply if rain falls within 3 hours
• Repeat if necessary after a minimum of 7 days for larger weeds or where regrowth occurs. Maximum 4 applications per year.

Where to Use

Suitable for use on gravel areas, pathways, permeable patios and driveways. For the control of weeds around ornamental garden plants, trees, and areas not intended to bear vegetation. Don't direct or allow spray drift onto cultivated plants or lawns as this product destroys all green plants.

How to Use

Shake well before use. We recommend wearing gloves.

Always ensure the container is stored and carried upright when not spraying. Maximum application rate: 30 mL/m², 3 litres to treat 100 m². When spraying large areas it is easier to mark out and measure the areas before application. Apply on a calm, dry day when there is no risk of spray drift onto adjacent desirable plants.

1. 1 Cut the plastic tie connecting the sprayer to the bottle with scissors. Remove sprayer and pull out the red connector.
2. 2 Insert the red connector into the top of the cap and click in place. Press and twist the cap anticlockwise to 'On' position (1/2 of a turn).
3. 3 Turn the sprayer nozzle to 'Narrow' or 'Wide' and squeeze the trigger a few times to build pressure. Spray weeds evenly, ensuring coverage on all the leaves.
4. 4 After use, press and twist the top of the cap clockwise to the 'Off' position.
5. 5 Squeeze the sprayer trigger to empty nozzle. Turn nozzle to 'X' (Off) and replace sprayer in the holder without disconnecting the red connector.

Other Information: Contains 43.1 g/L, Pelargonic acid as an Emulsion, oil in water (EW).

Manufacturer Address: Evergreen Garden Care UK Ltd, 1 Archipelago, Lyon Way, Frimley, Surrey, GU16 7ER.