Unibond Re-New Mould Resistant Bathroom and Kitchen Sealant Refresher 80ml

Highlights

• Auto smooth nozzle - Refreshes old bathroom or kitchen by simply adding on top of old sealant
• No other tools needed - Sealant features an innovative applicator, ensuring easy application & a professional finish
• Mould resistant - Mould is an unwelcome guest in your home. Show it the door with this mould resistant sealant.

About this product

Tired of looking at that yellowed , mouldy, old sealant...but put off by the thought of replacing it? Re-new is the easiest way possible! Apply new, fresh, smooth sealant directly over old sealant. Minimal skills needed, done in minutes for use in your bathroom or kitchen.

The new improved auto-smooth nozzle allows you to easily apply directly over old sealant for a perfect finish without the need for any other tools. It can help you quickly rejuvenate dirty, cracked sealant faster than before for a perfectly smooth and clean result.

Clean the surfaces before applying. Treat mouldy sealant with bleach/mould cleaner then allow to dry thoroughly. Place the nozzle on sealant with UniBond logo facing you, tilt to ensure tight seal between the wall/bath, shower or sink. Lightly squeeze and push the bottle forward, keeping the nozzle at the same angle. Clean excess product with tissue during application. For a perfect finish, repeat step 3 without squeezing.

Pack size

80ml

Preparation and usage

Average coverage 5 metres enough for standard bath and shower

How to apply

• 1 Clean the surface before applying. Treat mouldy sealant with bleach/ mould cleaner. Allow to dry thoroughly.
• 2 Place nozzle on sealant with UniBond logo facing you, tilt to ensure tight seal between the wall/bath, shower or sink.
• 3 Lightly squeeze and push the bottle forward, keeping the nozzle at the same angle.
• 4 Clean excess product with tissue during application.
• 5 For a perfect finish, repeat step 3 without squeezing.

• After 6h min water contact
• 24h Cleaning product contact
• 5m Average coverage for 1mm coating layer
• Enough for standard bath and shower.
• Correctable: If result is unsatisfactory remove product immediately with paper tissue/water and re-apply.
• After use: clean the applicator with tissue and replace cap.
• Suitable for covering coloured silicones (coating thickness 1mm)

Storage

Use within one month after opening

Other information

2004/42/EC A (i) One-pack performance coatings, VOC max 140 g/l, VOC 35 g/l. Contains biocidal product: preservative thiabendazole.

Safety information

UFI: 6TQ8-40JS-400E-12WK

Warning. Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Warning! Hazardous respirable dust may be formed when used. Do not breathe dust. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Avoid release to the environment. Wear eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Dispose of contents/container in accordance with national regulation.

Manufacturer

GB: Henkel Limited, Winsford, Cheshire, CW7 3QY. IRL: Henkel Ireland Distribution Ltd, Dublin, D24 YH42.

Recycling

Card. Recycle