Nuby Incredible Gulp Toddler Beaker 360ml

• Perfect for hydration
• Softflex spout
• No spill
• BPA free

Pack size: 360ml

Preparation and usage

Instructions: Please read and retain this important information for future reference.

To disassemble:

• 1. Pull spout out and pull back through swivel collar vertical opening.
• 2. Pull spout base through bottom of cup lid.

To use:

• 1. Open flip-top to expose spout by pressing the push button.
• 2. The hygienic cover will pop open to expose the spout for drinking.
• 3. Flip the hygienic cover closed in order to keep spout sanitary and spill free.

Cleaning: Remove screw cap, remove silicone seal ring from underneath and push button to open spout. To remove silicone spout lift upward to stretch spout tubing (mid-section of spout) and slide through swivel collar vertical opening. Once the tube portion of the spout is free of the swivel collar, grasp the silicone spout from underneath and pull through the screw cap to remove. Reverse this process to reassemble the spout. Ensure the silicone valve is securely attached to the vent otherwise your beaker will leak.

Cleaning and sterilisation: Before first use, disassemble and clean the product and then place the components in boiling water for 5 min. This is to ensure hygiene. Before each subsequent use clean carefully to ensure hygiene. Wash in warm soapy water and rinse in clean water or use a dishwasher (top shelf only). Do not clean with solvents or harsh chemicals. Do not allow product to come into contact with oil based foods (e.g. oil/tomato based sauces) as staining will occur. Suitable for all forms of sterilisation.

Inspect before and after each use and pull the spout in all directions.

Please retain these instructions for future reference.

Note: It is important that the lid is thoroughly rinsed by allowing water to flow across every surface to remove any food residue and ensure hygiene. Shake well to allow any trapped water to escape.

Storage

Do not store or leave in direct sunlight or near a source of heat. Do not store with or allow to come into contact with solvents or harsh chemicals.

Country of origin

Produce of: Made in China

Safety information

NOTE: It is important that the lid is thoroughly rinsed by allowing water to flow across every surface to remove any food residue and ensure hygiene. Shake well to allow any trapped water to escape.

For your child's safety and health

WARNING!

• Continuous and prolonged sucking of fluids will cause tooth decay.
• Always check food temperature before feeding.
• Throw away at the first signs of damage or weakness.
• Keep components not in use out of the reach of children.
• Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
• Never use feeding teats as a soother.
• Always use this product with adult supervision.

Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling or if the product has disassembled. Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if a baby is allowed to use this type of beaker for long periods through the day and particularly through the night, when saliva flow is reduced or if it is used as a soother. Take extra care when microwave heating; localised over heating can occur. Always mix the heated food and check the temperature before feeding.

Not suitable for use in a conventional oven or a combination microwave oven with the grill feature switched on. Do not leave the spout in direct sunlight or heat or leave in disinfectant sterilising solution for more than recommended as this may weaken the teat. FOR SAFETY AND HYGIENE REASONS IT IS RECOMMENDED THAT THE SPOUT IS REPLACED EVERY 2 MONTHS. Microwave safe. Not suitable for fizzy (carbonated) drinks. Complies with EN14350.

Recycling

Whole Packaging. Recycle