MOVA Z60 Ultra Roller Complete Robot Vacuum Black

Product details

HydroForce Mopping Fresh water sprays. Dirty water? Gone! HydroForce Mopping powers real-time clean water spray, rinsing the mop while removing dirty water to minimize cross contamination, with smart fluffing helping maintain the mop's optimal condition for consistent cleaning performance.

All-New AutoShield Tech Tired of wet mops ruining your carpets? AutoShield Tech instantly detects carpets, retracts the mop, and deploys shields to block moisture. Unlike others that halt cleaning, Z60 Ultra Roller Complete goes furthur - it lifts the chassis for better passage and maintains full suction power and side brush rotation, ensuring dry and clean carpets in a single pass.

Turbo Power for Strong, Fast Pickup Powered by TurboForce 9 high-speed motor, Z60 Ultra Roller Complete features 28,000Pa powerful suction that easily captures hair, dust, and up to 99% of large debris.

MaxiReach Brush and Mop The MaxiReach Brush dynamically extends to sweep up dust, hair, and debris-achieving 99.99% edge coverage. With MaxiReach Mop, the already extended 25.6cm roller mop can extend further by 4.1cm, working with edge-laser navigation and HydroForce Mopping to clean tight corners and along walls with power and precision.

Anti-tangle TroboWave DuoBrush Combines a pure rubber brush and a rubber-bristle brush to tackle hard floors and soft carpets respectively, with cantilevered spiral roller design for powerful pick up of hair with 99% hair removal efficiency and large debris,while minimizing tangles.

StepMaster 2.0-Your All-Terrain Pro Easily cross over steps, thresholds, door tracks, U-shaped furniture legs, and small obstacles up to 8cm tall.

AI-Powered LiftPro Chassis When detecting low obstacles like shag rug, it automatically lifts the entire chassis for a smoother glide that helps avoid dragging and missing debris.

360° Mapping & Smart Spot Cleaning DToF Navigation maps your home with 360° precision, plans better paths, and targets messes with pinpoint accuracy. It maps in greater details, so that it cleans with better control.

Spots the Low, Reaches the Deep With Dual-Laser 3D Structured Light +RGB AI+Side-Edge Laser+LED- Z60 Ultra Roller sees what often goes unseen. From under-cabinet to narrow hallways, it navigates through tricky corners, slipping in with its ultra-slim 96mm body for blind spot cleaning.

Binocular AI Vision Identifies 200+ obstacles - including cables, toys, shoes, and even pet waste - so you don't have to pre-clean. With smarter object detection and avoidance, MOVA navigates confidently around your home, minimizing interruptions and maximizing your peace of mind.

Self-Care Base Station Experience the convenience of the All-in-One Base Station, designed to simplify your cleaning routine with auto refill, emptying, washing, and charging, helping empower real hands-free maintainence.

DuoSolution System Innovatively integrated with two cleaning solution compartments with smart dispensing: Compartment A for general cleaning solution to break down tough stains; Container B for pet odor elimination, working together for a cleaner, fresher home in one go.

Hot Water Mop Wash, Scorch the Dirt! The Base Station heats water to 80°C (176°F) for deep cleaning, disinfecting the mop to tackle tough stains and bacteria. Three additional temperature settings (Room Temp/45°C/60°C) adapt to different cleaning needs.

Your Voice, Its Command Say Hey, MOVA, and you're in control. Start your cleaning, find your ideal settings for each room and carpet, and MOVA tackles the mess-all with two simple words.

Tailored Cleaning, Right from Your Phone CleanGenius Auto Recommendations detect carpets, boost suction, and target edges like curtains and corners. Just one tap on the phone, and it'll map, plan, and clean every tricky spot for you.

What's in the Box?

• Z60 Ultra Roller Complete Robot Vacuum
• Base station
• Dust bag (pre-installed)
• Roller mop (pre-installed)
• User manual

Specifications:

How to use

Before Use:

• Place the Base Station and Connect to an Electrical Outlet - Place the base station in a location that is as open as possible with a good Wi-Fi signal. Leave enough space as shown in the figure and remove any objects in the shaded area. Insert the power cord into the base station and plug it into the socket.
• Install the Ramp Extension Plate
• Remove Robot Protections and Install the Mop Assembly
• Connect the Robot to the Base Station - Press and hold the power button on the robot for 3 seconds to turn it on. Place the robot onto the base station with the mop assembly facing toward the washboard. Then you will hear a voice notification when the robot successfully connects to the base station. After the robot is fully charged, the status indicators on the robot and the base station will remain lit for 10 minutes and then dim.
• Add MOVA Cleaning and Pet Odor Solution Remove the dust tank cover and pull out the auto solution dispenser module. Open the upper lids of the module and add cleaning solution and pet odor solution into specialized compartment. Close the lids, put the module back into the base station, and then reinstall the dust tank cover.
• Add Water to the Clean Water Tank - Take out the clean water tank from the base station and fill up the tank with clean water. Then install it back into the base station.

Connecting with the MOVAhome App:

• Download the MOVAhome App - Scan the QR code on the robot or search MOVAhome in the app store to download and install the app.
• Add Device - Open the MOVAhome App, tap Scan QR code to connect, and scan the same QR code on the robot again to add the device. Please follow the prompts to finish the Wi-Fi connection. (Note- Only 2.4 GHz Wi-Fi is supported.)

Vacuum and Mop:

• Start cleaning - Press the button on the robot, or use the app to make the robot start from the base station. Then the robot will plan the optimal cleaning route and perform the cleaning task based on the created map.
• Auto mop washing - When cleaning, the robot will automatically return to the base station to wash mop pads based on the mop pad cleaning frequency specified in the app.
• Automatically empty the dust box and wash and dry the mop pads - After the robot finishes a cleaning task and returns to the base station to charge, the base station will automatically start emptying the dust box. Then it will wash and dry the mop pads.
• Clean the used water tank - After the robot has completed its task, please clean the used water tank to prevent any odor.

Mop after Vacuuming: Enable the mopping after vacuuming function in the app, and the robot will automatically lift the mop assembly to vacuum the floor. After vacuuming is completed, the robot will return to empty the dust box, and then start mopping after automatically lowering the mop assembly.

Vacuum Only: Enable the vacuuming function in the app, and the robot will automatically lift the mop assembly and start vacuuming.

Mop Only: Enable the mopping function in the app, and the robot will check if the mop assembly is installed. If not, manually install the mop assembly, and then the robot will automatically start mopping.

Important info

Country of Origin: China