MAM Silicone Bottle Teats Fast Flow 4+ Months Level 3 2 per pack

Please retain instructions for future use.

Cleaning and Sterilising
- Before first use, clean the teat and place it in boiling water for 5 minutes. This is to ensure hygiene.
- Before each subsequent use, carefully clean the teat in warm soapy water. Rinse well with clean water before sterilising, in order to ensure hygiene. Avoid harmful ingredients in the soap such as alcohol, chlorine, and/or microplastics. Do not leave the teat standing in the cleaning detergent like soapy water longer than recommended - this could negatively affect the product function.
- Dishwasher safe in top rack (max. 65C/149F) but food colourings may discolour the teat.
- Do not use abrasive cleaning agents. Only soft bristle brushes or soft sponges should be used.
- After cleaning, sterilise using one of the following methods: steam sterilising (electric or microwave according to manufacturer's instructions), boiling in water for at least 5 minutes or immersing in a liquid sterilising solution. After sterilising allow teat to cool down.
- Do not leave the teat in sterilising solutions longer than recommended, or leave in direct sunlight or heat - this could negatively affect the product function and may weaken the teat.
- Ensure no residual food remains in the teat after cleaning and sterilising.

Further important information
- When first used and sometimes during use, the ventilation slit (in the raised bubble on the underside of the teat base) can stick together. This will prevent air from entering the bottle during feeding and as a result, cause the teat to collapse. Slowly brush over the bubble (ventilation) a few times with your thumb or fingers to re-open the slit.
- Inspect all individual bottle parts before each use and pull the feeding teat in all directions. Replace at the first signs of damage or wear.
- Do not use pin or sharp object to enlarge feeding hole.
- Use sugar free foods or liquids only.
- Store teats in a dry sealed container. Bottle teat fits all Mam Bottles and the Trainer+.
- Insert teat into top of bottle screw ring until you hear a \click\.
- Teats must be replaced every 1-2 months for hygiene and safety reasons.

Blister Pack

Blister - Recycle

Safety Warning:
For your child's safety and health
WARNING!
- Continuous and prolonged sucking of fluids may cause tooth decay.
- Always check food temperature before feeding.
- Throw away at the first signs of damage or weakness.
- Keep components not in use out of the reach of children.
- Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
- Never use feeding teats as a soother.
- Always use this product with adult supervision.

Additional Information:
FSC - FSC Mix, Packaging, FSC C158705

Patent number: GB 2402347

0 Months 1/4 extra slow flow
0+ Months 1/4 slow flow
2+ Months 2/4 medium flow
4+ Months 3/4 fast flow
6+ Months 4/4 Ideal for Thick Liquids
Just a recommendation. May vary depending on your baby's drinking patterns.

For more about MAM teats: www.mambaby.com

For more information please contact:
MAM (UK) Ltd,
PO Box 271,
Teddington,
TW11 8FT.
Tel: 0208 943 8880
Fax: 0208 943 8881
www.mambaby.com