Holts Tyreweld Emergency Puncture Repair Kit

Tyreweld Emergency Puncture Repair For quick and easy puncture repairs. No tools or jack required. Seals puncture, reinflates tyre, gets you back on the road fast. No damage to your tyre, guaranteed. How to use: (Read all 6 points before using) 1.      If possible, find and remove cause of puncture. 2.      If possible, move vehicle so puncture is at the bottom of tyre. 3.      Screw the connector to your tyre valve. 4.      Twist red button to ON and move to a safe position away from passing traffic. 5.      Once can gas fully emptied, twist red button to OFF and unscrew from the tyre valve. 6.      IMPORTANT: Drive immediately for at least 6 miles at a max speed of50mph to seal puncture. Check and adjust tyre pressure as required.  What to do next: The repair is temporary and will get you home. As soon as you can, get the puncture professionally repaired. Additional Advice: This Tyreweld is for tyres with a diameter of up to 16 inches. The diameter in inches can be found on the tyre sidewall (see diagram), R16 refers to 16 inches. Suitable for cars, vans, trailers and caravans. Will not repair where tyre sidewall is damaged, tyre has come off the rim, tyre is ripped and puncture is larger than 5mm. Store securely in your boot. When temperature drops below 0?C, warm can in your hands or hold in front of the heater vent before use. Safe for use with tyre-pressure monitoring systems. www.holtsauto.com/holts Danger. Extremely flammable aerosol. Pressurised container: may burst if heated. Do not pierce or burn, even after use. Keep out of reach of children. Protect from sunlight. Do not expose to temperatures exceeding 50?C/122?F. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. If medical advice is needed, have product container or label at hand. Dispose of contents/container in accordance with local regulations.