Spray directly onto black mould or damp stains from a distance of 3 to 5 cm, then leave it to work for 30 minutes before wiping clean. This HG mould spray breaks down stubborn black stains on tile grout, silicone joints and plaster without scrubbing, and is a trusted name in UK household cleaning. Its self-acting formula contains anionic surfactants and chlorine-based bleaching agents below 5 percent.
Highlights
About this product
HG mould spray destroys all moulds immediately and easily. It is a self-acting cleaner that deals quickly and effectively with unhealthy black mould stains. These dirty black mould, damp or mildew stains often occur on the silicon seals between the bathtub and the tiled wall, in the shower cubicle or on plaster. This produces black stains that are bad for your health. HG mould spray removes these stains quickly and easily. Suitable for tile and silicon joints, plasterwork, etc.
Ingredients
Anionic Surfactants, Chlorine-Based Bleaching Agents <5%
Pack size
500 ml
Preparation and usage
Directions for use: Remove the locking clip before use. The product has a bleaching action. If in doubt, first test on an inconspicuous area or a discreet place. Do not remove fungi and algae before using the product. Press the nozzle at the front side and turn a quarter. Spray the surface from 3 - 5 cm distance and leave it to work for 30 minutes. In case of stubborn stains, spray again and leave to work for another 30 minutes. Clean the sprayed surface with sponge and water. Elastic grouting (for instance silicone paste) must be washed off after 30 minutes and be treated again. Turn the nozzle quarter backwards after use (blocking position). For cleaning large surfaces with green deposits, we advice HG algae mould remover.
Country of origin
Made in the Netherlands
Other information
German Consumer Test Institute
Safety information
WARNING H315- Causes skin irritation. H319- Causes serious eye irritation. H400- Very toxic to aquatic life. EUH206- Warning! Do not use together with other products. May release dangerous gases (chlorine). P101- If medical advice is needed, have product container or label at hand. P102- Keep out of reach of children. P264- Wash hands thoroughly after handling. P273- Avoid release to the environment. P305+P351+P338- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313- If eye irritation persists: Get medical advice/attention.
Manufacturer
Made by: HG International b.v., P.J. Oudweg 41, 1314 CJ Almere, The Netherlands.
Brand details
