The HG Bathroom Mould Remover Foam Spray is a powerful cleaning solution that destroys mould with its unique foam formula. It bonds to vertical surfaces and works within 30 minutes without scrubbing. Simply spray onto affected areas, allow it to act, and rinse clean.
HG mould remover foam spray destroys all moulds immediately and easily. This self-acting foam spray with longer bonding deals quickly and effectively with unhealthy black mould stains. Mould often occurs in the bathroom and other damp places. HG mould remover foam spray has a unique foam formula. It is easy to aim, stays on longer and that gives it a longer active time. Ideal for vertical surfaces. Suitable for tile and silicon joints, plasterwork, etc. Use biocides safely. Always read the label and product information before use.
IngredientsAnionic Surfactants, Chlorine-based Bleaching Agents < 5%
Pack size500 ml
Preparation and usageDirections for use: Remove the locking clip before use. If you have used the bottle before, remnants of the liquid may be left in the nozzle, causing it to work less well when you reuse the bottle. Before reusing the bottle, we recommend you rinse the nozzle with hot tap water, e.g. by running the water through the air holes at the side of the foam pipe. The product has a bleaching effect, so in case of doubt start by testing it in an unobtrusive place. Do not remove mould first. Press the nozzle at the front side and turn a quarter. Spray the surface from a distance of 3-5 cm. In case of persistent dirt, spray again after 30 minutes and leave it to work for another 30 minutes. Clean the sprayed surface with water and a sponge. Wash off elastic joints (e. g. Silicon sealant) after approx. 30 minutes and spray again. Turn the nozzle a quarter backwards after use (blocking position). For cleaning large surface areas with green deposits, we recommend HG algae and mould remover.
Dosage: 2-3 m² wall surface, 6-8 m² tile joints.
StorageTransport and store cool, dark and in an upright position. Keeps longer at lower temperatures.
Country of originProduce of: Made in the Netherlands
Safety informationAttention: We recommend you ventilate well during use and wear rubber/plastic gloves. Prevent splashes on clothing, paintwork, plastic shower trays and and vertical blinds. Rinse immediately with water on contact. Prevent contact with metals, such as prints on decorative strips, aluminium and stainless steel. Do not treat coloured surfaces. We do not recommend the use of this product on ceilings. Some permanent brown discolouring may occur after use on light elastic joints (e.g. silicon sealant). You may also see brown colour could be removed with Hypo (sodium thiosulphate) which is available from the costumer service department request. The bottle may not be reused.
