Gorilla Grab Adhesive Heavy Duty Formula 200ml

Description

Easy to Use - Flexible, fast grab formula which bonds virtually anything.

Ultra-High Strength - Provides a long-lasting heavy duty bond.

Indoor / Outdoor - 100% waterproof formula which withstands extreme heat and cold.

Gap Filling - Fills voids with little or no shrinkage.

Gorilla Grab Adhesive is so versatile, it grabs virtually anything. The flexible, gap filling formula provides a heavy duty bond that'll last.

Gorilla Grab Adhesive is 100% waterproof and withstands extreme temperatures, meaning you can use it indoors or out, for an extra-tough bond.

Gorilla Grab Adhesive is a flexible, gap filling formula which holds in an instant and can be used both indoors and out to provide a long-lasting, heavy duty bond to virtually anything.

©2022 Gorilla Glue Europe Ltd.

The Gorilla Glue Company has been offering industry leading adhesives for over two decades and currently serves the UK and Europe from offices based in Chorley, Lancashire. The original Gorilla Glue formula was first discovered being used in Indonesia on teak furniture, but consumers soon found it to be incredibly versatile and demand soared. Gorilla's ever-expanding range of adhesives are designed to be TOUGH, and now include Super Glues, Wood Glue, Specialist Tapes, Epoxies, Sealants and more.

Preparation

Directions

All surfaces should be clean, dry and free of dirt, grease, oil and old adhesive. Remove cap and foil seal from tube before first use.

1. Squeeze adhesive onto one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps. Best results achieved if applied above 5°C.
2. Within 10 minutes of application, press surfaces together and hold for 20-60 seconds. Heavy items may require temporary support and mechanical fastening. Full cure achieved in 24 hours.
3. Remove any excess adhesive immediately with a dry cloth. White spirit may be used according to manufacturer's instructions.

Remove excess adhesive with a dry cloth and replace cap tightly to prevent adhesive from curing.

Grab adhesive is paintable for up to 30 minutes after application and will fully cure in 24 hours; this may take longer in lower temperatures or humidity and/or when bonding non-porous surfaces. For best results when painting, apply paint within 30 minutes of applying adhesive. Apply paint with reduced brush/roller pressure to avoid disturbing adhesive.

Service temperature: -40°C to 93°C.

Gorilla Grab Adhesive White

Contains: N-(3-(trimethoxysilyl)propyl)ethylenediamine; Trimethoxyvinylsilane; 3-(trimethoxysilyl)propylamine; [3-(2,3-epoxypropoxy)propyl]trimethoxysilane

WARNING. Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wear protective gloves/ protective clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Dispose of contents in accordance with local, state or national legislation.

Contains: N-(3-(trimethoxysilyl)propyl) ethylenediamine, Trimethoxyvinylsilane. May produce an allergic reaction.

Country of Origin

Country of origin: United Kingdom

Packaging

Tube

Storage

Store in a cool, dry place.