Cassandra Double Rib Hot Water Bottle

Hot Water Bottle

Highlights
5 year guarantee

Preparation and usage
Instructions For Use

• For safe use and to obtain the maximum life of this hot water bottle, you should observe the following instructions.
• When filling this hot water bottle do not use boiling water and fill to a maximum of two-thirds capacity or less. Do not overfill as this might cause the bottle to burst.
• Hold the bottle by the neck in an upright position and fill slowly to avoid hot water splashing back.
• Expel air from the bottle by lowering it carefully onto a flat surface until water appears at the opening.
• Screw the stopper sufficiently tight to ensure that there is no leakage. Finger-tight should be adequate.
• Finally, make sure the funnel is empty.
• If there is a possibility that prolonged contact with the skin could occur, an adequate cover should be used to prevent burns.
• Under no circumstances should the hot water bottle be used as a cushion and be sat on.
• Do not fill using the water from a domestic hot water system as this can considerably shorten the life of the hot water bottle.
• Prevent contact with hot surfaces. Prevent contact with oil or grease.
• When not in use drain completely and keep with the stopper removed in a cool, dry, dark place. Prevent exposure to sunlight.
• Do not place anything on top of the bottle during storage.
• Check the bottle and stopper for wear and damage prior to use.
• Stop using immediately at the first signs of wear, damage or perishing.
• After filling, always check the bottle for any leaks carefully before use.
• Using the bottle every day for prolonged periods of time can shorten its lifespan.
• Only use the stopper provided with this bottle, using another stopper could potentially compromise the bottle's integrity.
• When using a Cassandra back opening cover with this bottle, always place the opening of the cover face down if using in a bed. Always ensure that the cover is completely closed with the hook and loop fixings before use, to prevent the bottle becoming exposed.
• For bottles with covers included - If there are decorative such as ribbons, please remove these before use.
• Retain these instructions for future reference

Country of origin
Produce of: Made in PRC

Other information
This bottle is manufactured to the specification of British Standard 1970:2012. This hot water bottle is made from natural rubber.

Safety information

• Even when using the bottle with a cover you should take precautions not to have direct prolonged contact with the same area of skin.
• Store out of reach of children. Small parts represent a choking hazard.
• For children, only use under adult supervision and with cooler water.
• WARNING - HOT WATER BOTTLES CAN CAUSE BURNS. AVOID PROLONGED DIRECT CONTACT WITH THE SKIN.
• SAFETY FIRST
• PLASTIC BAGS CAN BE DANGEROUS. TO AVOID DANGER OF SUFFOCATION KEEP THIS BAG AWAY FROM BABIES AND CHILDREN.

Manufacturer
Produced for: Paul Murray PLC, Wide Lane, Southampton, SO18 2FA, UK.

Brand details
Paul Murray PLC, Wide Lane, Southampton, SO18 2FA, UK.