Milton Sterilising Fluid 1L - Cold Water Baby Bottle Sterilizer

How to Use
The Cold Water Method at room temperature (+18-20C)
For baby accessories:
1. Clean: Wash bottle, teats, breastfeeding equipment in warm soapy water using Milton baby bottle cleaner, then rinse in cold water.
2. Prepare solution: Fill your unit with 5L of tap water, add 1 full cap of Milton Fluid (30 ml, dilution at 0.6% v/v).
3. Add items: Close the lid. Submerge items under water. Wait 15 mins. Rinse. Items can stay in the solution until needed. Other accessories can be added to the solution for 24 hours. Renew the solution every 24 hours.
For home hygiene: To disinfect surfaces, use 5 caps of Milton fluid to 5L of tap water (150 ml, dilution at 3.0% v/v). Make sure that all the surfaces to be disinfected are clean prior to disinfection: Apply 30mL/m with a cloth or wipe. Wet surfaces completely. Leave on for 5 mins and rinse with water. Ideal for tabletops, work surfaces, fridges, bins, chopping boards, cups.

Milton method, instructions: For baby bottles and utensils, add 1/2 capful (15ml) of Milton Fluid for every 2.5 litres of water (dilution at 0.6% V/V). Wash bottles and utensils before immersing items in the solution. They are disinfected and ready to use after 15 minutes. It is not necessary to rinse. Renew the solution after 24 hours. Follow the same method to disinfect fruit, salads and vegetables. Rinse with plenty of water after soaking for 15 minutes in the solution. For kitchen surfaces dilute 6 half caps (6 x 15ml) of Milton Fluid in 5 litres of water (dilution at 1.8% V/V). Surfaces are disinfected after 15 minutes. It is not necessary to rinse.

Warnings: Keep away from children. In case of contact with the eyes, wash immediately with plenty of water and see a doctor. If swallowed see a doctor immediately and show him the packaging or label. Do not use in combination with other products as toxic gases may be released (chlorine). Take care not to splash as solution may discolour fabrics. Avoid contact with metal. Store away from heat.

Plastic Bottle

Pack - Recycle

Storage:
Batch/EXP: see on the bottle

Safety Warning:
PRECAUTIONARY MEASURES (undiluted product): May be corrosive to metals. Causes skin irritation. Harmful to aquatic life with long lasting effects. Contact with acids liberates toxic gas. Keep out of reach of children. Keep only in original packaging. Absorb spillage to prevent material damage. Avoid skin contact with this mixture. Always wash hands carefully after handling. If medical advice is needed, have product container or label at hand.
IF ON SKIN: Wash with plenty of soap and water. IN CASE OF SKIN CONTACT: remove contaminated clothing. Watch out for any remaining product between skin and clothing, watches, shoes, etc. Wash the skin thoroughly with soap and water or a recognized cleaner. If the contaminated area is widespread and/or there is damage to the skin, a doctor must be consulted or the victim transferred to hospital.
IN CASE OF MASSIVE INHALATION: move the patient to fresh air and keep warm and at rest in a position comfortable for breathing. If any discomfort persist seek medical help. IN CASE OF EYE CONTACT: wash thoroughly with soft, clean water for several minutes while holding the eyelids open. Remove contact lenses if present and easy to do. Continue rinsing. If there is any redness, pain or visual impairment, consult an ophthalmologist.
IN CASE OF INGESTION: do not give the victim anything orally. If the quantity is small (no more than one mouthful), rinse mouth with water. Immediately call a doctor or a poison control centre. Show the label.
Contain the discharges and collect them with non-combustible absorbent material (for example: sand, earth, vermiculite, diatomaceous earth) in drum sand dispose as waste in compliance with the current legislation. Clean preferably with a detergent, do not use solvents. Do not empty or wash into drains and streams. Avoid release to the environment. Dispose of contents to hazardous waste collection authorized in accordance with local, regional, national and / or international regulations. The disposal of this packaging in the environment will be banned.
WARNING! Do not use together with other products. May release dangerous gases (chlorine). Do not use on metal. Mixture which by chemical action can corrode and even destroy metals.
This product should be used in accordance with the product label. Dispose of contents/container in accordance with local regulations. Poisons Information: For information or to report a poisoning incident contact The National Poisons Information Centre (01 8092166).
STORE AND USE CAREFULLY. TAKE CARE NOT TO SPLASH AS IT MAY DISCOLOUR FABRICS. KEEP CAP TIGHTLY CLOSED AND KEEP BOTTLE UPRIGHT TO PREVENT LEAKS. ALWAYS USE ON A SMALL NON-VISIBLE SURFACE FIRST. STORE AWAY FROM HEAT. PROTECT FROM SUNLIGHT. Keep away from food, drink and animal feeding stuffs.

Additional Information:
Trademarks owned by Milton International.
All right reserved.

Milton

Milton Sterilising Fluid allows you to sterilise in 15 minutes only, killing all bacteria, viruses, fungi and spores (tough dormant bacteria). It has been used in hospitals for many years as a simple and very reliable method.

To be used for sterilising breast feeding equipment and all babies feeding utensils, including bottles, soothers, teething rings, small plastic toys and weaning items.

The Milton solution is harmless and leaves no unpleasant taste or odour, so there is no need to rinse after use - utensils are safe for your baby to use immediately

Trusted by Midwives: Quantitative survey on 52 British midwives in April 2022.

Anti-Germ Efficacy: Bactericidal: EN 14561 in 15 min at 0.6% v/v and EN 16615 in 5 min at 3.0% v/v.
Yeasticidal: EN 14562 in 15 minutes at 0.6% v/v and EN 16615 in 5 minutes at 3.0%.
Type of preparation: soluble concentrate (SL)
Biocidal product PTO2 and PTO4, surface disinfectant including food and feed area not intended for direct application to humans or animals.

Milton International,
9 rue Marcel Sembat,
Building Le Saint Louis,
44100 Nantes,
France.

milton-tm.com
Milton International,
9 rue Marcel Sembat,
Building Le Saint Louis,
44100 Nantes,
France.
FR: (+33) 05 49 68 15 15