Gorilla Epoxy Glue - 25ml Syringe

Packaging- Two part plastic syringe, mixing tray, wooden spatula, blister cardWarnings- As per CLP labelInstructions- PREPARATIONProtect work area from spills. All surfaces should be clean, dry.To improve adhesion, roughen smooth surfaces with sandpaper before gluing.Remove black cap from middle of plunger. With tip pointing upward, snap the tamper seal off the syringe and eliminate air by slowly pushing plunger until resin and hardener are at the tip.1. DISPENSE & MIXDispense even amounts of resin and hardener onto a clean, disposable surface. The package blister can be used as a mixing tray. Mix for at least 20 seconds until mixture is uniform. To close, pull plunger slightly back, wipe syringe tip with a clean, dry cloth and replace cap.2. APPLYApply to surface within 5 minutes. Bond strength will decrease the longer you wait to apply.3. GRIPGrip objects together and leave undisturbed 30 minutes. You can use clamps, heavy objects or Gorilla Tape® to achieve gripping pressure.Full cure achieved in 24 hours.

At ASDA, we do everything we can to make sure the information about the products we sell is always as accurate as possible. However, because products are regularly improved, the product information, ingredients, nutritional guides and dietary or allergy advice may occasionally change.

As a result, we recommend that you always read the label carefully before using or consuming any products. Please do not solely rely on the information provided on this website Because of this, ASDA is unable to accept liability for any inaccuracies or incorrect information contained on this site.

This does not affect your statutory rights. This information is supplied for personal use only. It must not be reproduced in any way whatsoever without the prior consent of ASDA, nor without due acknowledgement.

In-store availability, prices and promotions may vary from those online.